The Eminence Red White and Blues guitar speaker is the natural upgrade for the classic American amp. A versatile guitar speaker, great for southern rock or blues. Nice tight low-end, smooth midrange and top end sparkle. American cousin to The Governor.
SPECIFICATION
-
Nominal Basket Diameter 12", 304.8mm
-
Nominal Impedance* 8 ohms
-
Power Rating** Watts 120W
-
Music Program N/A
-
Resonance 110Hz
-
Usable Frequency Range 80Hz - 4.3kHz
-
Sensitivity*** 101.0dB
-
Magnet Weight 38 oz.
-
Gap Height 0.31", 7.92mm
-
Voice Coil Diameter 1.75", 44.5mm
THIELE & SMALL PARAMETERS
-
Resonant Frequency (fs) 110Hz
-
DC Resistance (Re) 6.42
-
Coil Inductance (Le) 0.43mH
-
Mechanical Q (Qms) 7.19
-
Electromagnetic Q (Qes) 0.89
-
Total Q (Qts) 0.79
-
Compliance Equivalent Volume (Vas) 30.8 liters / 1.09 cu.ft.
-
Peak Diaphragm Displacement Volume (Vd) 44.7cc
-
Mechanical Compliance of Suspension (Cms) 0.07mm/N
-
BL Product (BL) 12.3 T-M
-
Diaphragm Mass Inc. Airload (MMs) 30.1 grams
-
Efficiency Bandwidth Product (EBP) 124
-
Maximum Linear Excursion (Xmax) 0.8mm
-
Surface Area of Cone (Sd) 532.36 cm2
-
Maximum Mechanical Limit (Xlim) N/A
MOUNTING INFORMATION
-
Recommended Enclosure Volume
-
Sealed Acceptable
-
Vented Acceptable
-
Driver Volume Displaced 122 cu.in. / 2 liters
-
Overall Diameter 12.03", 305.5mm
-
Baffle Hole Diameter 11.07", 281.1mm
-
Front Sealing Gasket Fitted as standard
-
Rear Sealing Gasket Fitted as standard
-
Mounting Holes Diameter 0.25", 6.4mm
-
Mounting Holes B.C.D. 11.59", 294.3mm
-
Depth 5.1", 130mm
-
Net Weight 8.2 lbs, 3.7 kg
-
Shipping Weight 10.1 lbs, 4.6 kgs
MATERIALS OF CONSTRUCTION
-
Coil Construction Copper voice coil
-
Coil Former Polyimide former
-
Magnet Composition Ferrite magnet
-
Core Details Non-vented core
-
Basket Materials Pressed steel basket
-
Cone Composition Paper cone
-
Cone Edge Composition Paper cone edge
-
Dust Cap Composition Zurette dust cap
Footnotes
* Please consult www.eminence.com for specifications of models with alternative impedances.
** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.
*** The average output across the usable frequency range when applying 1W/1m into the nominal impedance. ie: 2.83 V /8 ohms, 4 V /16 ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
**** BETA 8CX, 10CX, 12CX and ACOUSTINATOR™ CX 2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
***** Multiple units exceeded published rating evaluated under AES 500 and AES 800 noise sources and test standards while mounted on Eminence's TI-2000 horn in a nontemperature-controlled environment.
****** The average on axis output across the entire usable frequency range when applying 1W/1m into the nominal impedance while mounted on a Community SH 494 horn measured with: LMS (software calibrated) using a 0.25" [6.4mm] supplied microphone mounted 1m from horn mouth, Hafler P1500 Trans-Nova amplifier, 2700 cu.ft. chamber w/fiberglass on all six surfaces (three with custom made wedges). Plane-wave tube response and impedance curves measured with LMS on a 0.75" [19.1mm] diameter tube with adapter to allow for smooth transition to throat diameter and 1W/1m into nominal impedance. Prices and Specifications Subject to Change Without Notice.